AVE-ita-

441048SU

230V TOUCH DIMMER 40-500W DOMUS 1M
230V~ dimmer for resistive and inductive loads (incandescent and halogen lamps 40-400W, ferromagnetic transformers for low voltage 40-400 VA halogen lamps, electronic inductive transformer type 40-300VA OSRAM HALOTRONIC HTM 70/230-240, HTM 105/230-240, HTM 150/230-240) - controlled by touching the frontal area or from multiple points with NO buttons - low cunsumption led for identification in the darkness - output and level relay status memorization in case of black out - 1 module
Commercial Features
Technical data ETIM
Manuals and downloads
Request information
Commercial Features

Commercial data

Code EAN13: 8008379077809
Standard packing: 1,00
Minimum packaging: 1,00
Code EAN13 min.pck.: 8008379077809
Length min.pck.: 52,00
Width min.pck.: 30,00
Height min.pck.: 59,00
Volume min.pck.: 0,09
Weight min.pck.: 48,40
Quantity min. order: 1,00
Reference Metel: 230V TOUCH DIMMER 40-500W DOMUS 1M
Product status: In Stock

Safety instructions

Safety instructions:
Guarantees and complaints:​
Technical data ETIM

Technical data ETIM

Mounting method:
Assembly arrangement:
Method of operation:
Colour:
Connection type:
Surface protection:
Frequency: 50|60
Material quality:
Type of load:
Material:
Type of fastening:
Light value memory: No
Substation input: No
RAL-number (similar): 9010
Serial dimmer: Si
Applicable with movement sensor: Si
Applicable with transmission button: No
Applicable with infrared button: No
Applicable with presence indicator: Si
Applicable with button: No
Applicable with time switch/timer: Si
Nominal power: 40|500
Nominal voltage: 230|230
Transparent: No
Surface finishing:
Suitable for degree of protection (IP):
Device width: 22.5
Device height: 45
Number of modules (module system): 1
Dimming phase cut-off: No
Dimming phase cut-on: No
App control via Bluetooth: No
Manuals and downloads
Request information
Last update: 02-08-2023

AVE reserves the right to modify the characteristics of the products shown at any time and without notice. The installation must be carried out by qualified personnel in compliance with the provisions governing the installation of electrical equipment in force in the country where the products are installed. For the conditions of use of the information on the product sheet see conditions of use.

Are you interested in AVE solutions?

AVE Spa