AVE-ita-

443068RL

IR-P SWICH RELAY 10A ALLUMIA 1M
LUCE AMICA Infrared motion detector for lighting control - NO 10(4)A 230V~ output relay - 230V~ power supply - Frontal duty cycle time regulation from 10 s to 7 min - Frontal regulation of light sensitivity threshold - fixed lens range from 2 m to 12 m and 150o opening - input for remote controls push bottons - possibility to set operating mode: Automatic/Night/Forced ON/Semi-Automatic - 1 module
Commercial Features
Technical data ETIM
Manuals and downloads
Request information
Commercial Features

Commercial data

Code EAN13: 8008379085019
Standard packing: 1,00
Minimum packaging: 1,00
Code EAN13 min.pck.: 8008379085019
Length min.pck.: 53,00
Width min.pck.: 48,00
Height min.pck.: 59,00
Volume min.pck.: 0,15
Weight min.pck.: 47,00
Quantity min. order: 1,00
Reference Metel: IR-P SWICH RELAY 10A ALLUMIA 1M
Product status: In Stock

Safety instructions

Safety instructions:
Guarantees and complaints:​
Technical data ETIM

Technical data ETIM

Nominal voltage: 230
Mounting method:
Colour:
Model:
Connection type:
Surface protection:
Creep-under protection: No
Voltage type:
Frequency: 50|60
With remote control: No
Staircase monitoring: Si
Bridging switch: No
Suitable for wireless transmission: No
Material quality:
Max. transmission range frontally: 12
Max. transmission range sideways: 12
Max. starting current: 10
Material:
Response value sensitivity adjustable: Si
Dim function with dimmer basic element: No
Suitable for C-load: Si
Remote operation: No
HVAC-control: No
Constant light control: No
Substation input: No
RAL-number (similar): 9007
With signal unit: Si
Teach-function for response value luminosity: Si
Forced switch off: No
Scan angle: 150
Degree of protection (IP):
With alarm function: No
Transparent: No
Animal zone: No
Surface finishing:
Min. switch-on time: 10
Max. duty cycle: 7
Suitable for wall mounting: No
Response value luminosity adjustable: Si
Optimum mounting height: 0.1
With DALI interface: No
Forced switch on: Si
Sensor type:
Suitable for ceiling mounting: No
Anti-bacterial treatment: No
Manuals and downloads
Request information
Last update: 02-08-2023

AVE reserves the right to modify the characteristics of the products shown at any time and without notice. The installation must be carried out by qualified personnel in compliance with the provisions governing the installation of electrical equipment in force in the country where the products are installed. For the conditions of use of the information on the product sheet see conditions of use.

Are you interested in AVE solutions?

AVE Spa