441ABRTHP
114,97 €
VAT excluded
The 441ABRTHP device, when combined with the themperature and humidity probe 44xABTMH-SO, allows the flow pump of the cooling circuit to be stopped. It is equipped with a relay, which can be put in series with the pump circuit, and a local button for status reset. It is also equipped with a red indicator to signal an alarm. It is integrated in the AVEbus home automation system to manage temperature control in home and building automation systems. The article is made in a plastic container – 2 mod. S44.
Safety warnings
Technical drawings
ETIM data
| Nominal voltage: | 12 |
|---|---|
| Mounting method: | Other |
| Bus system KNX: | No |
| Bus system radio frequent: | No |
| Bus system Powernet: | No |
| With bus connection: | Si |
| Number of digital inputs: | |
| Other bus systems: | Other |
| Bus system LON: | No |
| Degree of protection (IP): | IP40 |
|---|---|
| Temperature control with built-in continuous control: | No |
| Buttons for manual operation at the drive: | Si |
| Temperature and stroke indication: | No |
| Voltage supply over bus: | Si |
| Function master/slave: | No |
| Bus system KNX radio: | No |
| Radio frequent bidirectional: | No |
Commercial features
| Code EAN13: | 8008379500635 |
|---|---|
| Standard packing: | 1,00 |
| Minimum packaging: | 1,00 |
| Code EAN13 min.pck.: | 8008379500635 |
| Length min.pck.: | 53,00 |
| Width min.pck.: | 48,00 |
| Height min.pck.: | 59,00 |
| Volume min.pck.: | 0,15 |
| Weight min.pck.: | 84,00 |
| Quantity min. order: | 1,00 |
| Reference Metel: | PUMP SHUTDOWN LOCAL RESET 2M |
| Product status: | In Stock |
Download area
Commercial catalog page
Instruction leaflet
Software
DXF - Dimensions
Commercial catalog page
Instruction leaflet
Software
DXF - Dimensions
Reference laws and directives
Marks
Complete with
Request information
Fill in the form below and one of our staff will get back to you as soon as possible
02-03-2026
AVE reserves the right to modify the characteristics of the products shown at any time and without notice. The installation must be carried out by qualified personnel in compliance with the provisions governing the installation of electrical equipment in force in the country where the products are installed. For the conditions of use of the information on the product sheet see conditions of use.
