VNXI63CRV
59,93 €
VAT excluded
90° vertical bend in polyethylene for quick connection to the semi-rigid circular ducting Ø75/63mm (sealing rings included)
Safety warnings
Technical drawings
ETIM data
| Model: | |
|---|---|
| Connection 1: | Slide sleeve |
| Connection 2: | Slide sleeve |
| Antistatic version: | Si |
| Insulation thickness: | |
| : | No |
| Bend angle: | -90 |
| Material insulation: | Other |
| Working length connection 1: | 20 |
| Working length connection 2: | 20 |
| Nominal duct diameter: | 75 |
|---|---|
| Bend model: | Segmental bend |
| With pre-mounted seal: | Si |
| Production method: | Other |
| Anti-bacterial treatment: | Si |
| Inner surface protection: | Untreated |
| Outer surface protection: | Untreated |
| With push-on profile: | No |
| With push-on clamp: | Si |
| Air tightness class according to EN 1751: |
Commercial features
| Code EAN13: | 8008379102037 |
|---|---|
| Standard packing: | 1,00 |
| Minimum packaging: | 1,00 |
| Code EAN13 min.pck.: | 8008379102037 |
| Length min.pck.: | 173,00 |
| Width min.pck.: | 75,00 |
| Height min.pck.: | 173,00 |
| Volume min.pck.: | 2,24 |
| Weight min.pck.: | 113,00 |
| Quantity min. order: | 1,00 |
| Reference Metel: | 90oVERTICAL BEND POLYET. d75/63mm |
| Product status: | In Stock |
Reference laws and directives
Marks
Complete with
Request information
Fill in the form below and one of our staff will get back to you as soon as possible
02-03-2026
AVE reserves the right to modify the characteristics of the products shown at any time and without notice. The installation must be carried out by qualified personnel in compliance with the provisions governing the installation of electrical equipment in force in the country where the products are installed. For the conditions of use of the information on the product sheet see conditions of use.
